Table of Contents
Advertisement
Mounting System
Please note that all measurements below are for conduit fittings.
1" (one
on each
side)
Ensure 1"
between
inverter
and wall
1" (four locations
underneath the
inverter)
1" (one location
underneath the Auto-
Transformer)
22
1.5" (multiple locations
on the sides of the
battery enclosure)
If needed, use a Greenlee Knockout Punch to create a punch
that will work for your installation.
1.5" (two locations, one
on each side of the 5
kWh battery enclosure)
Installation Manual
Advertisement
Table of Contents
