Rear Panel - Nicols STROB 3000 DMX User Manual

In the box
1 x STROB 3000 DMX with lamp PX-3000
-
1 x bracket
-
1 x power cable
-
1 x user guide FR-ENG
-
C. REAR PANEL
D. REPLACE THE LAMP AND FUSE
LAMP
STROB 3000 DMX provides high and low power settings. The high power setting provides maximum
flash intensity, the low power setting reduces output and extends lamp life. The setting is selected on pin
6 of the Mode dipswitch and applies regardless of the other switch settings.
The lamp is electronically regulated to prevent overheating.
Warning : only PX-3000 xenon lamp is approved in the STROB 3000 DMX. Installing a lamp that is not
approved may create a safety hazard or damage the fixture
1. Main power : AC230V, 50/60Hz
2. Flash : indicate flash status
3. DMX signal interface : input/output
4. Power indicator : indicator power status
5. Data : show signal status
6. Dip address : set signal address in 1/3/4
channel DMX mode
7. Mode : dipswitch to set function mode