Rear Panel - Nicols SKY 250 RB User Manual

REAR PANEL

MIC: On the music activation play mode. MIC controls the voice.
Voice Controller / Auto / OFF: Music activation play mode / Automatic play mode / Power
off.
Motor Speed Controller: Control the motor strobe speed, change the pattern strobe speed.
Stroboflash: Control the speed of flash strobing.
DC 5V: Plug in 5V/1A DC adaptor.
3. STEP
a. AC Power
This fixture includes an external power supply which is auto-ranging and runs on 230V AC,
50Hz power. Only use the included supply!
To determine the power requirements for a particular fixture, see the label affixed to the back
plate of the fixture or refer to the fixture's specifications chart. A fixture's listed current rating
indicates its average current draw under normal conditions.
Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat
(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only as a
0 to 100% switch.
Always connect the fixture to a circuit with a suitable electrical ground.
b. Mounting
The Mini-2031 Laser light may be mounted in any position provided there is adequate room
for ventilation.
Be sure that the structure can support the weight of the fixture. Please see the "Technical
Specifications" section of this manual for a detailed weight listing. Mount the fixture securely.
Do this with a screw, nut and bolt, or a hanging clamp. When ragging, consider routine
14-