nEtWoRk SEttingS
2.
To add a new Route, click New route
3.
Specify the following parameters:
•
Name
Name – select the network type.
•
Destination - enter the destination IP of the destination
Destination
host, subnet address, network address, or default route.
The destination for a default route is 0.0.0.0.
•
Netmask – enter the network mask. This is used in
Netmask
conjunction with the destination to determine when a
route is used.
•
Gateway
Gateway – enter the IP address of your Fios Router.
•
Metric – enter a measurement preference of the route.
Metric
Typically, the lowest metric is the most preferred route.
If multiple routes exist to a specific destination network,
the route with the lowest metric is used.
4.
Click Apply
Apply to save changes.
New route.