Mounting The Device To A Rack - Siemens SIMATIC NET Installation Manual

Removing the Device
To remove the device from a DIN rail, do the following:
1.
2.
3.
2.1.2

Mounting the Device to a Rack

To secure the device to a standard 48 cm (19 in) rack, do the following:
1.
RUGGEDCOM RS8000T
Installation Manual, 01/2021, C79000-G8976-1023-05
Insert a flathead screwdriver into the slot of the sliding release and move it
down.
3
1
2
1
DIN Rail
1
DIN Rail Adapter
2
Figure 2.2 Removing the Device from a DIN Rail
Swing the bottom of the device away from the DIN rail.
Lift the device off the DIN rail.
Remove the four screws from the side of the device.
2.1.2 Mounting the Device to a Rack
2
Installing the Device
1
9