Britax Wizard User Manual page 19

Britax wizard user guide
Hide thumbs Also See for Wizard:
Table of Contents

Advertisement

P2285_R02c.qxd
12/8/2003
Care and Maintenance
Buckle Removal
1
Fully recline the child restraint.
2
Locate the metal buckle strap
retainer on bottom of the
restraint.
3
Pull retainer away from child
restraint to loosen.
4
Turn the retainer so that the short side will go through the slot
in the restraint shell (Fig. A).
5
Push the retainer through slots in the shell and cover, to the
front of the restraint.
Rethreading the Buckle
1
Locate the buckle slot.
2
Turn the buckle retainer so that the short side will go through
the slot in the cover and restraint shell (Fig. A).
3
Pull buckle away from restraint until tight, then verify that the
strap is not twisted and the release button is facing outward.
34
12:22 PM
Page 36
A
Cleaning the Buckle
The buckle will need to be
periodically checked and cleaned
of any accumulated debris, dirt,
or dried liquids.
• THOROUGHLY RINSE, using
warm water (Fig. B).
• SOAK, overnight if possible,
using warm water to loosen
hardened drinks or food.
• TEST
THE
BUCKLE,
by
fastening and unfastening
until a positive click is heard
after inserting the second
buckle tongue (Fig. C). If click
is not heard, repeat cleaning
procedure.
• TOWEL DRY
DO NOT:
Lubricate,
use
solvents, abrasive cleaners,
soap or household detergents.
Care and Maintenance
B
Unbuckle
Buckle
C
35

Advertisement

Table of Contents
loading

Table of Contents