REX fit FOR FUN RX-600 G Operating Instructions Manual page 29

Assembly
Assembly
STEP 3
REX_Trainer_RX600G_13.indd GB-29 REX_Trainer_RX600G_13.indd GB-29
WARNING
1. Mount the seat clamp (7) with four screws (45) onto
the designated retainer (10) (see Fig. 7).
2. Release the four screws (43) and washers (46) from
the seat (20).
3. Mount the seat (20) onto the seat clamp (7) using
the screws released in Step 2 (see Fig. 8).
4. Use four screws (57) to mount the backrest (21) to
the seat clamp (7) (see Fig. 9).
GB-29
21.05.13 10:46 21.05.13 10:46