Roland VERSELAB MV-1 Owner's Manual page 30

Recording CTRL Knob Movement in Steps (Motions)
Creating a Linear Motion (Motion Designer)
Use the Motion Designer to automatically create and record linear
motions that change over time.
This function is convenient for creating effects such as ducking (side
chain).
* Motions previously recorded are overwritten.
1 .
Follow the steps in "Selecting a Clip" (p. 19) to select the
clip to which you want to record the motion.
2 .
Press the [EDIT] button, and then press the [MOTION] button.
The MOTION MENU screen appears.
3 .
Use the [VALUE] dial to select "MOTION DESIGNER," and then
press the [VALUE] dial.
The MOTION DESIGNER screen appears.
4 .
Use the [VALUE] dial to select a parameter, and edit the value.
Parameter Explanation
FORM TYPE Selects a waveform that varies over time.
STEP LEN
Specifies the number of steps from the motion's beginning to end.
MIN VALUE Specifies the minimum value of the waveform.
MAX VALUE Specifies the maximum value of the waveform.
DEST KNOB Specifies the CTRL knob for which the motion is recorded.
5 .
Use the [VALUE] dial to select ">>EXEC," and then press the
[VALUE] dial.
The motion that was created starts recording again from the
beginning of the step.
6 .
Press the [EXIT] button to finish.
30