Injector Cap, Injector Screen, Injector, Plug And O-Ring - Water Depot Blaster Soft Owner's Manual

Injector Cap, Injector Screen, Injector, Plug and O-Ring

Drawing
Order No.
No.
1 CLK V3176
2 CLK V3152
3 CLK V3177
4 CLK V30101Z
CLK V30101A
CLK V30101B
CLK V30101C
CLK V30101D
CLK V30101E
5 CLK V30101F
CLK V30101G
CLK V30101H
CLK V30101I
CLK V30101J
CLK V30101K
Not Shown CLK V3170
Not Shown CLK V3171
* The injector plug and the injector each contain one 011 (lower) and 013 (upper) o-ring.
Note: For upflow position, injector is located in the up hole and injector plug is in the
other hole. WS1HR&HS upflow bodies are identified by having the DN marking removed.
For a filter that only backwashes, injector plugs are located in both holes.
Description
Injector Cap
O-ring 135
Injector Screen
WD1 Injector ASY Z Plug
WD1 INJECTOR ASY A BLACK
WD1 INJECTOR ASY B BROWN
WD1 INJECTOR ASY C VIOLET
WD1 INJECTOR ASY D RED
WD1 INJECTOR ASY E WHITE
WD1 INJECTOR ASY F BLUE
WD1 INJECTOR ASY G YELLOW
WD1 INJECTOR ASY H GREEN
WD1 INJECTOR ASY I ORANGE
WD1 INJECTOR ASY J LIGHT BLUE
WD1 INJECTOR ASY K LIGHT GREEN
O-ring 011
O-ring 013
Quantity
1
1
1
1
1
*
*
20