Using Your Baumatic Refrigerator - Baumatic BLE360 Instruction Manual

Using your Baumatic refrigerator

Before switching on
During fi rst use
Control panel
169893en.indd 9 169893en.indd 9
• Make sure that it has been installed by a suitably qualifi ed
person, as per the information contained in Baumatic's
installation instructions.
• After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process, are allowed to settle.
• The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
• The interior of the appliance should be cleaned with a solution
of sodium bicarbonate dissolved in lukewarm water. The
interior and accessories should be thoroughly dried, after the
cleaning process has been completed.
• There can be an odour when you fi rst switch on the appliance.
It will lessen as the appliance starts to cool.
• When you fi rst switch on the appliance, the compressor
will run continuously for approximately 24 hours or until the
refrigerator reaches a cool enough temperature.
• During this period of time, you should try not to open the
door frequently or place a large amount of food within the
appliance.
• If the unit is switched off or unplugged, you must allow at least
5 minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
A Temperature selector and ON/OFF button
B Green LED (illuminates when the appliance is switched on)
C Digital temperature display Indicates the actual freezer
temperature inside the appliance, from -16°C to -24°C*
* Certain models only.
9
12.10.2006 11:41:42 12.10.2006 11:41:42