Using Your Baumatic Larder Fridge; Before Switching On; During First Use - Baumatic BR200.3A Instruction Manual

Using your Baumatic larder fridge

Before switching on

o Make sure that it has been installed by a suitably qualified
o After delivery, wait for eight hours before connecting the
o The outside of the appliance and the removable accessories
o The interior of the appliance should be cleaned
o There can be an odour when you first switch on the appliance. It

During first use

o When you first switch on the appliance, the compressor will run
o During this period of time, you should try not to open the door
o If the unit is switched off or unplugged, you must allow at least 5
Get user manuals: See SafeManuals.com
person, as per the information contained in Baumatic's
installation instructions.
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process, are allowed to settle.
contained within it, should be cleaned with a solution of liquid
detergent and water.
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
will lessen as the appliance starts to cool.
continuously for approximately 24 hours or until the refrigerator
reaches a cool enough temperature.
frequently or place a large amount of food within the appliance.
minutes before restarting the appliance on the thermostat or
connecting it to your mains supply.
10