Baumatic BLE360 Instruction Manual page 11

Baumatic ble360: user manual
Table of Contents

Advertisement

Turning on the appliance
and setting the
thermostat
The digital display
10
169893en.indd 10
169893en.indd 10
You switch on your appliance by connecting it to your mains
supply and setting the thermostat. The thermostat is located on
the right hand side of the control panel.
• The appliance is switched on by turning dial A towards the
Max position.
• The green LED will come on when the dial moves past Min.
• The appliance is switched off when the arrow on the dial points
to the ON/OFF symbol
mains power.
• The thermostat automatically regulates the temperature inside
the freezer, depending on what position you have turned the
thermostat control knob to.
• Position
means that the appliance is switched off and will
not cool.
• Position Min will give you a higher temperature inside the
freezer.
• Position Max will give you a lower temperature inside the
freezer.
• Ideally the thermostat should be set to the Eco position.
• The freezer section can cool down to -18°C and lower.
• IMPORTANT: The ambient temperature of the room, the
temperature of food and the amount of food that has been
placed in the freezer and how often the door is opened, will all
affect the temperature being maintained by the appliance.
• On the maximum setting (position Max), your freezer will work
harder to maintain a lower temperature. There is no need to
run your appliance on this setting for prolonged periods and
you should return the thermostat knob to the Eco position.
• On models with a digital display, when you are adjusting the
thermostat position, the display will fl ash and indicate the set
temperature.
• When the fl ashing stops, the setting of the temperature is
complete and it is stored in the appliance's memory.
• Please allow time for the appliance to reduce down to the
desired temperature.
• Each time the appliance is switched on for the fi rst time, the
digital display indicates a temperature of +9°C and fl ashes
• This value will remain on the display until the actual
temperature in the appliance drops below +9°C.
• The fl ashing will then stop and the digital display will indicate
the actual temperature within the refrigerator.
. However the appliance is still under
12.10.2006 11:41:43
12.10.2006 11:41:43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ble360ss

Table of Contents