Table of Contents
Advertisement
Description of the product features
1) Shelves
o The shelves may be placed in any of the guide slots within the
interior of the appliance. They are protected from sliding out.
o To remove a shelf: Take off all of the items that are stored on
the shelf that you want to remove. Then lift the front of the shelf
and carefully pull it out of the grooves.
2) Crisper drawers and cover
o The crisper drawers are in the bottom of your refrigerator and
there is a cover that goes over them.
o The cover helps to prevent fruit and vegetables from drying out
prematurely.
3) General door rack
o The door liner holds various racks, which are suitable for storing
eggs, cheese, butter and yogurt. As well as smaller packages,
tubes, cans etc.
5) Bottle rack
o The lower door rack should be used for storing reasonably sized
bottles.
o IMPORTANT: IT IS IMPORTANT THAT NONE OF THE
SHELVES THAT SIT IN THE DOOR ARE OVERLOADED, AS
THIS WILL DRASTICALLY REDUCE THEIR WORKING LIFE.
Using your Baumatic fridge
Before switching on
o Make sure that is has been installed by a suitably qualified
person,
as
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
o The outside of the appliance and the removable accessories
contained within it should be cleaned with a solution of liquid
detergent and water.
per
the
information
contained
in
Baumatic's
9
Advertisement
Table of Contents
