BORETTI IBRIDO TOP User Manual page 14

Please note:
Make sure that you test all individual connections (including the side burner)
when testing the device for leaks and, if necessary, that they are tightened
properly again. Even a small leak in the system can result in a dangerous
situation.
Please note:
Most gas cylinders nowadays are equipped with a mechanism for detecting
leaks inside the tank. If the gas is released too quickly, this mechanism
will shut off the gas supply. A leak can significantly reduce the gas supply,
making it difficult to start the barbecue.
If you are unable to seal a gas leak, shut off the gas supply and contact the
store where you bought the barbecue. Even a small leak can cause a fire.
If you are unable to start the barbecue after having tried a while, contact the
store where you bought the barbecue. Turn the control buttons to "OFF" when
you are not using the barbecue.
4.3 Starting the barbecue
Check the overall condition of the burners. If you are unsure about the condition
of the burners, please contact the store where you bought the barbecue. Make
sure the barbecue is standing on a flat surface. Keep the cooking compartment
clean and free from gasoline and/or other flammable or combustible liquids,
flammable gases, and flammable vapours. Make sure that the combustion and
ventilation are not blocked by any objects.
Do not use aluminium foil in the enamelled burner compartment or around
the flame tamers. Make sure the gas cylinder has adequate ventilation. Put
charcoal/briquettes in the designated coal container. Never use more than 1
kilo of charcoal/briquettes. Instead of firelighters or lighter fluid, it is possible to
use charcoal chimneys, electric starters or other resources suitable for lighting
charcoal. Always use these in accordance with the manufacturer's instructions.
14