Technical Specifications; Safety Information - Acquaer PEP033 Owner's Manual

TECHNICAL SPECIFICATIONS

Model: PEP033
Property
Voltage
Horse Power
Amps
Max. Head (ft.)
Max. Flow (GPH)
Discharge Size (in.)
Power cord length (ft.)
PERFORMANCE
GPH of water @ Total Ft. Head
Model
5 ft. 10 ft.
PEP033 3270 2560

SAFETY INFORMATION

WARNING
 T his pump motor is not submersible. Do not submerge the motor or allow motor to be exposed to
water. Personal injury and/or death from electrical shock could result.
 
D o not use this unit to pump chemicals, flammable liquids, sewage or corrosive liquids. You could injure
yourself and the pump will fail. Pumping these types of liquids voids the warranty.
 W ater and electricity can be dangerous if certain precautions are not adhered to. This pump is
designed to operate perfectly safe in a water environment; however, improper use and installation
can result in personal harm from electrical shock. Please pay attention to the following warnings.
 N ever touch any electrical device, including this pump, when it is touching water, in water, or even
in a moist environment. Always unplug (disconnect the electricity) when servicing or installing the
unit.
 R ISK OF ELECTRICAL SHOCK. This pump is supplied with a grounding conductor and grounding
-type attachment plug. To reduce the risk of electrical shock, be certain that it is connected only to
a properly grounded, grounding-type receptacle.
 D o not use the power cord or discharge hose to carry or handle the pump. Doing so may cause
damage to the power cord or discharge hose.
Specifications
115V/60Hz
1/3HP
4.3A
18 ft.
3270@5ft
1-1/4 in.
10 ft.
Max.
Head
15 ft. 20 ft.
1740 - 18ft
2