Operation; Alignment; Alignment Example - Bosch SCT 415 S52 Original Instructions Manual

en 40 | SCT 415 S52 | Operation
8.

Operation

8.1

Alignment

i
The specific values for the exact alignment of the
SCT 415 S52 are described in the car manufacturer's
"Repair instructions".
Abb. 6: View of front plumb bob
Abb. 7: View of side and rear plumb bob
|
1 690 386 051 2020-10-22
8.2

Alignment example

1. Make floor markings using the plumb bob on the
vehicle, and align the SCT 415 S52 accordingly.
2. Mark the floor for alignment. Place the SCT 415 S52
in front of the vehicle.
3. Center the SCT 415 S52 between the left (F) and
right (E) marking on the floor, using the inspection
glass in the base plate as a reference.
4. At the same time, slowly move the base plate until
the two pointers in the base plate opening point to
the line G-H.
x
Robert Bosch GmbH