Rear Panel Features - Wharfedale Pro TOURUS Series User Manual

REAR PANEL FEATURES

1. Bluetooth LED for pairing. USB activity LED. (*MBT models only).
(see BLUETOOTH and USB OPERATION section for more information).
2. Treble and Bass EQ controls. Use these to boost or cut the high and low frequencies
by +/-12dB
3. Transport controls for USB and BT. Play, pause, skip forward and skip backward
buttons to control USB file playback or BT source device. (*MBT models only)
4. Balanced XLR line output connector for direct connection to a second active
loudspeaker such as another Tourus.
5. USB input socket. For connecting a USB thumbdrive for file playback. (*MBT models
only)
6. Convection cooling plate. Tourus uses convection cooling. This means there are no
internal fans. Always leave space around a Tourus to ensure that any heat can be
dissipated.
7. 2 Input channels. For 12" and 15" models, Channel 1 can accept mic level inputs when
the switch is in the Mic position. The 6.3mm input jack is balanced and is also selectable
between mic and line levels depending on the position of the switch above.
8. Mic/Line Volume controls. These control the balance between the 2 channels. Channel
1 is mic/line. Channel 2 is Line plus BT/USB and the RCA connector inputs.
9. POWER cord receptacle: This is a receptacle for a standard IEC, three prong, grounded
AC electrical connection cord. Be sure that you are plugging into the correct source
voltage that matches what is indicated just below the power cord jack.
Tourus-AX12-MBT and Tourus-AX15-MBT
Line, USB &
Bluetooth
volume control
8.
Mic / Line
volume control
RCA connectors
7.
2 input
channels
6.
Convection cooling
No Fans
1.
Bluetooth LED
for pairing
2.
Treble & Bass EQ
3.
Transport
controls
USB & BT
4.
Balanced
link output
5.
USB input
mp3, flac and .wav
playback compatible
9.
POWER cord
receptacle
5
Tourus-AX12 and Tourus-AX15