Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Intelbras IWE 3001
Summary of Contents for Intelbras IWE 3001
- Page 1 User guide IWE 3001...
- Page 2 Congratulations, you have just purchased a product with Intelbras quality and security. The Intelbras IWE 3001 Wi-Fi repeater is the ideal solution to boost the signal from your home network. With it, you can share Internet access to various devices on a wireless network. You can configure the repeater via the WPS ( ) button and, with just two touches, increase the signal from your Wi-Fi network.
- Page 3 Wi-Fi network. location. Router IWE 3001 Router’s signal range Extended signal range Care and safety Do not leave your repeater exposed to sunlight or heat sources. Do not place the repeater in closed or tight places.
-
Page 4: Table Of Contents
Summary 1. Technical specifications 1.1. Meaning of LED ................5 2. -
Page 5: Technical Specifications
Next, we will explain how to install and configure your product as a Wi-Fi Repeater . Before you start, we recommend that you check the information of the item Care and safety, to choose the best location to install your IWE 3001. If you wish, you can also access our YouTube channel: https://www.youtube.com/user/IntelbrasBR . -
Page 6: Installation And Configuring As Wi-Fi Repeater Via Wps Button
Note that the router’s coverage area does not cover the entire residence, so a IWE 3001 is used as a Wi-Fi repeater to solve this problem. It is important to note that in this scenario, depending on the room you are in, when connecting a device (a laptop or smartphone, for example) to the Wi-Fi network it may connect either to the router or the repeater. -
Page 7: Installing And Configuring As Wi-Fi Repeater Via Web Browser
If you have not yet configured, follow these steps: » Step 1: plug the IWE 3001 into the outlet and wait for it to start (red LED stops flashing). This will take about 1 minute; » Step 2: connect to the Wi-Fi network under the name IWE 3001; if you are already connected to a network under another name, disconnect and connect to the Wi-Fi network under the name IWE 3001;... - Page 8 Option 1: by clicking the Advanced settings button at the end of the Wi-Fi Repeater mode configuration wizard. Option 2: by accessing the option Advanced settings in the menu of the web interface after configuring the IWE 3001 as Wi-Fi Repeater : In the advanced settings in the Wi-Fi Repeater mode the following settings can be changed: »...
-
Page 9: Restoring Factory Settings
4.1. Restore settings via physical button » Step 1: plug the IWE 3001 into the outlet and wait for it to start (red LED stops flashing). This will take about 1 minute; » Step 2: press the RST button for about 6 seconds When the reset time is reached, the product LED will turn off and then it will start flashing in red. -
Page 10: Firmware Update
Option 1: if the product LED is green and not flashing, the IWE 3001 network will not appear because the product is already configured. If you need to configure IWE 3001 again, you must refer to item 4. Restaurando as configurações de fábrica . After restoring, you must configure the product again. -
Page 11: Warranty Term
7. Intelbras is not responsible for the installation of this product and also for any attempts of fraud and/or sabotage on its products. Keep software and application updates, if any, up to date, as well as network protections necessary to protect against hackers. - Page 12 Support via e-mail: suporte@intelbras.com.br Customer Service: 0800 7042767 Where to buy? Who installs it? 0800 7245115 Imported in Brazil by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira Rodovia SC 281, km 4,5 – Sertão do Maruim – São José/SC – 88122-001 01.20 CNPJ 82.901.000/0014-41 –...
Need help?
Do you have a question about the IWE 3001 and is the answer not in the manual?
Questions and answers