Instructions For Installation Pages - Baumatic B602 User And Installation Instructions Manual

INSTRUCTIONS FOR INSTALLATION
This appliance must be installed by a competent person in
accordance with the current versions of the following UK (United
Kingdom) or ROI (Republic of Ireland) Regulations and Safety
Standards or their European Norm Replacements.
Please note that this appliance carries the CE mark for normal
domestic use and is not suitable for the marine environment.
: UK law stipulates that gas appliances must be installed and
NOTE
repaired by a CORGI. Registered Installer (all Baumatic Engineers
are CORGI Registered).
Gas Safety Regulations (Installation & Use)
Building Regulations
Environment)
Irish Standard for Domestic Gas Installations
Building Standards (issued by the Scottish Development)
IEE Wiring Regulations
Electricity at Work Regulations
BS 6172 Installation of Domestic Gas Cooking Appliances
(If necessary, BS 5482 Installation of Domestic LPG
Appliances)
BS 5386 Pt 4 Built-in Domestic Cooking Appliances
BS 5440 Installation of Flues and Ventilation for Gas
Appliances
Baumatic Ltd Installation Instructions
POSITIONING THE APPLIANCE – SEE PAGES 14 and 15
This appliance is classified as Class 1 and therefore can be built
into a standard 600mm kitchen unit providing the following
minimum distance is allowed: - 4mm between the oven and any
adjacent cabinet doors and drawers to allow the side protection
rails to be fitted, which form an integral part of the installation. The
surface of any adjacent cabinets and any materials used in the
installation must be able to withstand a minimum temperature rise
above ambient temperature during periods of operation (see corresponding
notes in the GENERAL INFORMATION on page 3).
(issued by the Department of
13