Adjusting The Front And Rear Volume - Sony CDX-M3DI Operating Instructions Manual

7
Press M or m repeatedly to select the
desired equalizer curve.
8
Press (ENTER).
9
Select the desired frequency and level.
1 Press < or , repeatedly to select
the desired frequency.
Each time you press < or ,, the
frequency changes.
62 Hz y 157 Hz y 396 Hz
y 1000 Hz y 2510 Hz
y 6340 Hz y 16000 Hz
2 Press M or m repeatedly to adjust
the desired level.
The level is adjustable by 1 dB steps from
–10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
3 Repeat steps 1 and 2 to adjust the
equalizer curve.
10
Press (ENTER).
After the effect setting is completed, the
display returns to the normal display.
Adjusting the front and rear
volume
1
Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2
Press (SOUND).
3
Press < or , repeatedly to select
"Fader."
4
Press (ENTER).
5
Press < or , repeatedly to adjust
the volume of front/rear speakers.
6
Press (ENTER).
The display returns to the normal display.
Adjusting the cut-off frequency for the
front/rear speakers
To match the characteristics of the installed
speaker system, you can select the cut-off
frequency of the speakers.
Cut-off frequency
off
Frequency (Hz)
1
During playback or radio reception,
press (MENU).
2
Press < or , repeatedly to select
"SoundTuning."
3
Press (ENTER).
4
Press M or m repeatedly to select
"HPF."
5
Press (ENTER).
continue to next page t
27