Siemens 7SG23 MSCDN – MP2A Manual page 29

MSCDN – MP2A
Capacitor unbalance protection
Document Release History
This document is issue 2010/02. The list of revisions up to and including this issue is:
Pre release
2010/02 Document reformat due to rebrand
05/02/2003 R5 Status inputs can now reset the Thermal elements to accelerate testing
27/01/2003 R4 Thermal time constant range corrected, 1 second is minimum step
08/01/2003 R3 Allowed for up to 27 SI and 29 OR in various tables
Inhibits added to tables and diagrams
26/11/2002 R2 Thermal time ranges now in seconds
Thermal setting range reduced
Open circuit time range reduced
R1, R2 open circuit separately identified now
Metering text corrected
Reylogic Diagrams updated
Event tables updated
23/10/2002 R1 Revision history added
Software Revision History
26/02/2006 2621H80002R9
The copyright and other intellectual property rights in this document, and in any model or article produced from it
(and including any registered or unregistered design rights) are the property of Siemens Protection Devices
Limited. No part of this document shall be reproduced or modified or stored in another form, in any data retrieval
system, without the permission of Siemens Protection Devices Limited, nor shall any model or article be
reproduced from this document unless Siemens Protection Devices Limited consent.
While the information and guidance given in this document is believed to be correct, no liability shall be accepted
for any loss or damage caused by any error or omission, whether such error or omission is the result of
negligence or any other cause. Any and all such liability is disclaimed.
©2010 Siemens Protection Devices Limited
MSCDN – MP2A Relay Settings