Troubleshooting - pro.point 8712127 User Manual

V1.0 6 in. BENCH GRINDER WITH PCB LCD READOUT 8712127
CLEANING
CAUTION! Do not use brake fluids, gasoline, petroleum-based
products, penetrating oils, etc., on the tool's plastic parts.
Chemicals can damage, weaken or destroy plastic, which may
result in a serious personal injury when the tool is in use.
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
Electric tools used on fiberglass material, wallboard, spackling
compounds, or plaster are subject to accelerated wear and
possible premature failure because the fiberglass chips and
groundings are highly abrasive to bearings, brushes,
commutators, etc. Consequently, we do not recommend using
this tool for extended work on these types of materials.
However, if you do work with any of these materials, it is
extremely important to clean the tool using compressed air.
LUBRICATION
This tool is permanently lubricated at the factory and requires
no additional lubrication.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or
by-laws for electronic devices, batteries, oil or other toxic liquids.

TROUBLESHOOTING

Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
Visit www.princessauto.com for more information 21