Table of Contents
Advertisement
Resetting the network configuration
Reset the refrigeration appliance's
settings to the default settings when
disposing of your refrigeration
appliance, selling it or putting a used
refrigeration appliance into operation.
This will reset the network
configuration so that all personal data
is deleted from the refrigeration
appliance. This will also ensure that a
previous owner is no longer able to
access the refrigeration appliance.
Reset the settings of the refrigeration
appliance as described in the chapter
"Resetting the settings to their default
settings ".
Switching off the Demo
mode
Demo mode allows the refrigeration
appliance to be presented in the
showroom without the cooling
system being switched on. This
setting is not needed for domestic
use.
If Demo mode has been switched on
as a default setting, will show on the
display.
In Settings mode , use the
and sensor controls to select
mode
and select OK to confirm your
selection.
Press OK for 4 seconds to deactivate
appear on the display.
Follow the instructions on the display.
The countdown
Demo mode will
deactivate in seconds
display.
Demo
will
will appear on the
Selecting additional settings
Demo mode deactivated. Appliance cooling
switched on
will appear on the display.
Confirm the message with OK.
The main screen will appear on the
display again.
71
Advertisement
Table of Contents
