Installation G-Cam/ANPR-49xx Table of Contents About This Documentation ........................3 Preamble ............................. 4 Information to User ........................... 5 Package Contents ..........................6 Installation of the System Components ....................7 Erecting the camera housing ......................7 The Capture Zone ..........................9 Lens Configuration ...........................
Installation G-Cam/ANPR-49xx About This Documentation This documentation is intended to help you install your GEUTEBRÜCK G-Cam/ANPR-49xx Number Plate Recognition System. Here you can find detailed information about installation, operation and features. Note You can download the latest versions of the manuals also in the Downloads section of our website: www.geutebrueck.com This documentation may not be copied, translated or converted to a machine-readable form, whether in whole or in part, without prior permission.
Installation G-Cam/ANPR-49xx Preamble Complete set for reliable day and night license plate recognition, including camera, lens, weatherproof housing, IR-Pass filter and IR headlights. The entire system was specially designed and developed for use in conjunction with the Geutebrück ANPR / LPR analysis software. G-Cam/ANPR-49xxx is equipped with a maintenance-free LED infrared illuminator that uses high- power LEDs at 850 nm to provide optimal illumination of the scene.
Installation G-Cam/ANPR-49xx Information to User CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE DEVICE COVER (OR BACK). CONTACT QUALIFIED SERVICE PERSONNEL FOR INTERNAL PART SERVICES. This symbol is intended to alert the user the presence of uninsulated “dangerous voltage”...
Installation G-Cam/ANPR-49xx Package Contents Housing included IR pass filter Splitter Wall mount bracket with concealed cable guide IR-LED illuminator Camera G-Cam/EBC-2112 Lens depending on customer selection Quick installations guide Data medium Operating instructions ANPR DE/EN in PDF Operating Instructions G-Cam/EBC-2112 in PDF IP admin tool for IP camera...
Installation G-Cam/ANPR-49xx Installation of the System Components Erecting the camera housing Proper erection of the system components is of great importance for correct operation and reliability of the system. In particular, the erection of the camera housing and the IR lighting strongly affect the recognition rate.
Page 8
Installation G-Cam/ANPR-49xx As can be seen from these figures, the horizontal angle of the camera should not be more than 20° from the vehicle's axis and the vertical angle should not be more than 30°. The greater the angle, the more the characters will be distorted. This distortion makes recognition more difficult, and therefore significantly impairs the recognition rate.
Installation G-Cam/ANPR-49xx The Capture Zone The European number plate with its dimensions 520x115mm should have a width between 100 and 200 pixels, optimum is about 150 pixels. Individual characters should be detected with 25 - 30 vertical picture elements. The sketch width of a number plate is detected with 3 - 4 picture elements. Gaps in between the characters are scanned with more than 2 picture elements.
Installation G-Cam/ANPR-49xx Vehicle Speed Considerations The build in camera provides a maximum capture rate of 30fps. The ANPR algorithm can be configured to use a frame rate between 3 and 30 frames per second. As vehicle speed increases, the number of possible images within the capture zone is reduced and should be considered when choosing the frame rate.
Page 11
Installation G-Cam/ANPR-49xx If necessary, use an additional overview camera. After setting up the system, the settings must be made in daylight, bright sunlight, night etc. should be checked regularly. NOTE Ensure all tests are undertaken by a qualified, trained engineer. Ensure safe working practices are always followed .
Installation G-Cam/ANPR-49xx Weather Proof Housing Instructions for mounting Before approaching the connecting devices, all the feed circuits must be disconnected. Make sure that at the beginning of the equipment there is a suitable sectioning device having a minimum distance of the contacts of 3 mm. ▪...
Installation G-Cam/ANPR-49xx Technical data of the splitter Input: Board feed: PoE+ (802.3at) Output: Input power of the heating: Camera: PoE 7 W IR-LED Illuminator: 48 VDC / 13 W Fig.3 POS. DESCRIPTION RJ45 input PoE+ RJ45 output PoE for camera ...
Installation G-Cam/ANPR-49xx IR-Pass Filter The IR pass filter only allows infrared light with wavelengths of more than 720nm to pass through. The visible light and backlight through the vehicle headlights are blocked. This results in an optimal illumination to recognize the license plates day and night. Please do not use any aggressive cleaning agents for cleaning.
Installation G-Cam/ANPR-49xx IR LED Illuminator Warnings Pay attention to the device surface: it could be hot, and its contact could cause damages to people and things. Before maintenance procedures, switch off the illuminator and wait until it has cooled down. All installation/maintenance procedures must be performed only by qualified staff.
Installation G-Cam/ANPR-49xx Technical Data ▪ Body made of die-cast aluminum, RAL7035 coating ▪ Stainless steel bolts and screws ▪ High transmittance front window made of polycarbonate ▪ Infrared wavelength: 850nm ▪ Illumination angles: 30° ▪ Distance: max 130 m ▪ Stainless steel bracket for mounting (included) ▪...
Installation G-Cam/ANPR-49xx On/off threshold adjustment It is not intended for the installer or user to adjust the on/off threshold. The factory setting is "ON" and the illuminator lights up continuously; day and night. The IR pass filter only lets IR light through. Therefore, the illuminator for license plate recognition must always be set to ON! Light intensity adjustment The light intensity of the IR illuminator is preset on the maximum value.
Page 19
Installation G-Cam/ANPR-49xx Before turning on the illuminator, remove the protective film (8) from the frontal window IMPORTANT Remember to tighten all the connections and the screws.
Installation G-Cam/ANPR-49xx Camera G-Cam/EBC-2112 IP BOX Camera Important Information Before proceeding, please read and observe all instructions and warnings in this manual. Retain this manual with the original bill of sale for future reference and, if necessary, warranty service. When unpacking the unit, check for missing or damaged items.
Installation G-Cam/ANPR-49xx Regulation Camera This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This symbol on the product or on its packaging indicates that this product shall not be treated as household waste in accordance with Directive 2002 / 96 / EC.
Installation G-Cam/ANPR-49xx Precautions & Notes Camera Handle the camera carefully Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage. Never disassemble the camera. Unauthorized disassembly may cause equipment failure or damage to the unit. Installing electricity wiring carefully Ask qualified personnel of electrical wiring for the installation.
Installation G-Cam/ANPR-49xx Feature Camera Camera ▪ 1/2.8” 1080p CMOS Image Sensor ▪ CS mount ▪ True Day/Night ▪ True WDR Video ▪ H.264 Baseline, Main, High Profile(MPEG-4 Part 10/AVC), MJPEG(Motion JPEG) ▪ Max 30fps in 1080p ▪ Text Overlay Network ▪...
Installation G-Cam/ANPR-49xx Part Names Camera Rear View ⑤ ⑨ ⑧ ① ⑥ NTSC/PAL ⑦ ③ ② ④ * Model herein and its appearance are subject to change without any prior notice. ① Power indicator It turns red when the power is on. ②...
Installation G-Cam/ANPR-49xx Configuration Set up Network Environment The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of the device from converting the MAC address’s hexadecimal numbers, which is attached to the device. Be sure that the device and PC are on a same area network before running the installation.
Installation G-Cam/ANPR-49xx Custom IP Environment IPAdminTool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot, and device organizations. To modify the device’s default IP address for customized network area: 1.
Page 28
Installation G-Cam/ANPR-49xx The IP Setup window appears. Give a new unique IP address by modifying the last two sets. 3. On the New Information table in the Single IP Change window, modify the last two digits of the device’s IP address, and modify the rest parts including subnet mask, gateway, and DNS if necessary by checking the user/ PC network area information.
Installation G-Cam/ANPR-49xx View Video on Web Page Type the proper IP address to view the live streaming images through a web browser. The default username and password is root / pass. ActiveX Installation 1. When the browser asks to install the AxUMF software, click Install to proceed. 2.
Installation G-Cam/ANPR-49xx View Video using IPAdmin Tool IPAdminTool automatically searches for all activated network encoders and IP cameras, and shows the product name, IP address, MAC address etc. 1. From the IPAdminTool’s product list, select the device by highlighting it. 2.
Need help?
Do you have a question about the G-Cam/ANPR-49 Series and is the answer not in the manual?
Questions and answers