Geutebruck G-Cam/ANPR-4900 Quick Installation Manual

Abb. 3
IR-LED illumination
The IR-LED illumination is already pre-assembled and adjusted.
The power is set to "maximum". If it is necessary to reduce the luminosity, detailed instructions are
given in the installation manual available on the data medium.
Lens configuration
With the varifocal lens already mounted, the angle of view can be adjusted to your requirements.
Select the optimum image section by turning the zoom control.
Adjust the sharpness of the lens by turning the focus control. Define an area in the field of view in
which the focus range should be located
Validity of the Documentation
This documentation is applicable for G-Cam/ANPR 49xx.
These instructions represent the technical status of the device at the time of
publication. Errors and omissions excepted.
Geutebrück reserves the right to make changes without prior notice.
EU Declaration of Conformity
This device complies with requirements according to the following EU regulations:
Regulation for electromagnetic compatibility (EMC) 2014/30/EU

Low Voltage Regulation 2014/35/EU

RoHS-Regulation 2011/65/EU

The currently valid version of the EU
Declaration of Conformity can be found here:
https://t1p.de/l7klm
Copyright © 2024 Geutebrück. All rights reserved.
Version No. 3.0 19.03.2024
G-Cam/ANPR 49xx
Quick Installation Guide
G-Cam/ANPR-4900 (0.02491)
G-Cam/ANPR-4901 (0.02492)
User Manual G-Cam/ANPR 4900-4901
A user manual with a description of the device and additional information on its use can be found here:
https://manuals.geutebrueck.com/