NYCe 4000 Multi-axis motion control
system
CAUTION
NOTICE
4 Intended Use
The Capacitor Kit is for indoor use only, and may only be used in combination
with parts indicated in this document. Not explicitly mentioned parts may not be
installed or connected. Usage is only allowed in explicitly indicated
configurations and combinations of parts.
Do not install and use this Capacitor Kit before you have read all relevant
documents. You must read the safety instructions and all other directions for
use before you start any work or activity with this Capacitor Kit.
One or more Capacitor Kits can be installed on the system housing, depending
on the number of drive slots in the module holder. A Capacitor Kit may be
needed for a drive slot which contains the NYM04.1-2PW-NNNN-NY4120,
NYM04.1-2PW-LMSN-NY4120/10 or NYM04.1-1HV-NNNN-NY4140 drive module,
depending on the application.
5 Accessories, Spare Parts and Wear Parts
The Capacitor Kit has no accessories nor any replaceable or wear parts. In case
of failure, the entire Capacitor Kit must be replaced.
6 Ambient Conditions
Maximum environment
temperature
Relative Humidity
Mechanical strength
Pollution degree
Overvoltage category
Maximum altitude
Tab. 6-1: Ambient conditions
In case of non-compliance with this safety
instruction, minor or moderate injury could
occur.
In case of non-compliance with this safety
instruction, property damage could occur.
Operating
+5 °C .. +55 °C
10 % .. 90 % (non-condensing)
Vibration: IEC 60068-2-6:2007
Vibration,
IEC 60068-2-64:2008
2
II
4000 m
Storage and transport
–40 °C .. +85 °C
5 % .. 95 % (non-condensing)
Shock: IEC 60068-2-27:2008
broad-band:
2
-
R911172629_Edition 06 Bosch Rexroth AG
5/19
Ambient Conditions