On-Board Channel Current Measurement - ABB DLynxII Series Application Note

ON-BOARD CHANNEL CURRENT MEASUREMENT

Each channel of DJT090 contains a shunt measurement circuit to sense output current for user to
check current sharing capability. Use a Multimeter mV range to measure exact output current of each
channel. The conversion ratio for voltage to current is 15mV/A. Take extra caution while probing, do
not short the shunts to the measurement points.
©2020 ABB. All rights reserved.
Connection
Example
Ring Connector Setup
Output Ripple @Vin=12V, Vout=1.2V