Advertisement
Available languages
Available languages
APS is running...
UK
P 03 - C 04
Whenever you press the BLUE button, APS
function stops and Program Table appears
on the screen.
If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.
Program
Press
or
button to select Program. Use
/
button to select the program number. .
You can also enter a number using the
numeric buttons on the remote control. There
are 100 programme storage between 0 and
99.
Band
Band can be selected either C or S. Press
/
button to select Band.
Channel
Channel can be changed by
numeric buttons.
Colour System
Press
or
button to select Colour System.
Use
/
button to change the colour system
to PAL, SECAM or AUTO.
If sound system is set to I (the UK setting),
SECAM will not be available for the colour
system settings.
Note:In AV modes, you can choose NTSC
3.58, NTSC 4.43 or PAL60 as well.
02-ENG-32820W-1050UK-17MB12-PANEU IDTV-(2 HDMI-3D PAN-BASIC PIP-VGA-WO SVHS)-50131284.p65
Sound System
Press
Press
system to BG,DK, L or L'.
Fine Tune
63.75 MHz
Press
6%
63.75 MHz
Search
Press
Cancel
/
can also enter the desired frequency using the
numeric buttons while Search item is
highlighted.
Store
Press
Stored" will be displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install
menu when the TV is in AV modes. Note that
limited options will be available. Switch to TV
mode for viewing complete version of the
Install menu.
/
button or
English - 92 -
92
or
button to select Sound System.
/
button to change the sound
or
button to select Fine Tune. Press
/
button to adjust the tuning.
or
button to select Search. Use
button to start programme searching. You
or
button to select Store. Press
or OK button to store the settings. "Program
INSTALL
Colour System
VCR
Store
23.07.2008, 10:38
Advertisement
