Download Print this page

Saba S 32 TNV 08 Operating Instructions Manual page 67

Colour television with remote control

Advertisement

Available languages

Available languages

Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player's instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, "Input Selection" section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio, use a component audio cable as illustrated
below. When the connection is made, switch to YPbPr source. See, "Input selection" section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown
below.
Component
audio
inputs
Note: These three methods of connection perform the same function but in different levels of
quality. It is not necessary to connect by all three methods.
02-ENG-32820W-1050UK-17MB12-PANEU IDTV-(2 HDMI-3D PAN-BASIC PIP-VGA-WO SVHS)-50131284.p65
Component
video
inputs
Scart sockets
Component
video
cable
Component
audio
cable
English - 66 -
66
HDMI
inputs
SCART
cable
HDMI
cable
23.07.2008, 10:38

Advertisement

loading