Page 1
MANUEL D’UTILISATION - BEDIENUNGSANLEITUNG - MANUALE DI UTILIZZAZIONE - USER MANUAL MANUAL DE UTILIZACIÓN - GEBRUIKSAANWIJZING - BRUKSANVISNING BETJENINGSVEJLEDNING - FOLHETO DE UTILIZAÇÃO- M 3610G...
Recommendations and Precautions 1.Operation Please read the following instructions carefully and follow them closely, they concern your personal safety and can affect the operation of your equipment. DO NOT OBSTRUCT VENTILATION OPE- NINGS. AVOID WATER, HEAT, DIRECT SUNLIGHT. Do not place audio loudspeakers next to your TV set as the magnets in the spea- kers may cause coloured patches on the screen.
1. Aerial Socket Enables connection of the aerial and, if required, a video recorder (see manual for latter). To tune the channel reserved for your video recorder, start up the recorder then carry out MANUAL CHANNEL SETTING operations. Store at any programme ending with a 9 (9,19,29, etc.) Each time you use the video recorder, switch to the channel assigned to it.
Remote Control Display programme No. and sleep timer (Yellow button) Display Timer Menu (Green button) Call up personal adjustments (Red button) Confirm an action or validate a menu option To leave a menu Volume level Sound mute To switch to connected equipment (e.g.: video recorder) Batteries: Remove the lid at the back of the remote control and insert two 1.5...
Automatic Channel Setting This set is equipped with an automatic search system which will search for and store all channels available in your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper. Ensure that the aerial lead is connected to the TV set.
Changing a Programme Number Select the channel number to be changed using the button. AUTO INSTALL. Using the numerical keypad on the remote control, enter the EURO new programme number. PR01 You can also use the buttons on the remote control. Press the button to confirm the change.
Manual Channel Setting Press the button twice to call up the channel setting menu. 1. Channel Search Select the 2nd line of the menu using the Start the search by pressing: – the button for a forward search, – the button for a backward search.
3. Fine Tuning Only necessary in the event of interference If fine tuning is necessary, select the 3rd line of the menu using the button. If necessary, adjust the picture using the Select the 4th line (PR) using the and store it in memory (see Programme Number and Storing in Memory) If a channel has required fine tuning, it will be stored in memory with the AFC (Automatic Frequency Control) deactivated.
Picture Adjustments Press the button to call up the Picture Menu. BRIGHTNESS COLOUR Select the function to be adjusted using the The tint function is only active in NTSC mode. Adjust as required using the Storing Personal Adjustments You can store the adjustments you have just made and call them up at a later stage.
Day to Day Operation Switching On - Selecting Programmes Switch on the television set using the main ON/OFF switch if the indicator is off. If it is on, enter the desired programme number. For programmes 1 to 9: Press the corresponding number on the remote control. For programmes 10 to 99 (e.g.
Page 12
THOMSON multimedia 46/47 Quai A. Le Gallo 92648 Boulogne Cedex France RCS Nanterre B 322019464 208 546 60...