Rosenbauer HEROS-matrix User Information page 21

6. SPARE PARTS
All spare parts can be easily exchanged.
Face shield, clear
Eye shield, clear
Eye shield, tinted
Helmet liner (complete)
Chin strap
7. INSPECTION, MAINTENANCE, DURATION OF USE
7.1 General
As a general principle, the instructions and rules in the user information provided
with every helmet supplied to the customer apply. It is important to strictly
observe all the instructions in the user information to ensure user safety.
Rosenbauer accepts no liability for damage caused by failure to observe the user
information and individual items of the user information.
7.2 Inspection
As a rule, the helmet, the helmet liner and the accessories should be inspected
for signs of damage before and after every operation. You must not use a
damaged helmet or damaged helmet parts; defective parts must be replaced
immediately. After each operation where the helmet has been exposed to unusual
stress (e.g. impact, knocks, dropping, other types of force, direct exposure to
flame, high and/or extended exposure to heat, exposure to chemicals, contact
with molten metal and others), all helmet components must be carefully
inspected before redeploying the helmet. This check must be performed by a
suitably trained member of staff; note that Rosenbauer offers appropriate staff
training. All helmet components must be inspected carefully and damaged parts
must be renewed without exception before the helmet is reused. We recommend
performing this check every 2 years and logging the inspection and replacement
of helmet components. Never use a damaged helmet, it might not provide the
protection you expect!
Helmet components must immediately be replaced by original parts if one of the
following criteria applies, or other visible damage exists:
Helmet shell + visor
a) Cracks of any kind
b) Missing components
c) Grooves or scratches deeper than 1 mm
d) Blistering
156850
156854
15685403
157263
157070
HEROS-matrix – Rosenbauer
GB
21