Ricoh Pro C5200 Series Manual page 98

CIP Training Pro C5200 series
Adjustment Settings for Operators
No.
033 [Textured Paper Mode
Voltage: BW: Side 1]
034 [Textured Paper Mode
Voltage: BW: Side 2]
035 [Textured Paper Mode
Voltage: FC: Side 1]
036 [Textured Paper Mode
Voltage: FC: Side 2]
Fuser Adjustment
For details about the following items, see page 134 "Fuser Adjustment".
No.
050 [Fusing Temp]
051 [Fusing Pressure Roller
Temp]
052 [Fusing Nip Width Setting]
053 [Fusing Temp to Feed Ppr]
054 [Additional Fusing Temp
1]
055 [Additional Fusing Temp
2]
056 [Cleaning Web Rotation
Interval]
057 [Cleaning Web Contact
Position]
058 [Fusing Nip Width
Adjustment: Envelope]
100 [Paper Feed Interval
Setting]
Item
Adjust the voltage applied to the paper for paper transfer
enabled.
Item
Adjust the heat roller temperature.
Adjust the pressure roller temperature.
Adjust the nip width between the fusing belt and pressure
roller.
Adjust the fusing temperature at which to allow paper
feeding after warming up.
Adjust the fusing unit's accumulated temperature for a
specific time after a job starts.
Adjust the fusing unit's accumulated temperature for a
specific time after writing starts.
Specify the interval between each activation of the
cleaning web.
Specify how the cleaning web comes into contact and
separates.
Adjust the nip width between the fusing belt and pressure
roller when an envelope is being fed.
Adjust the interval between the feeding of each sheet.
Description
Description