Kia XCEED PHEV MY21 Owner's Manual page 490

What to do in an emergency
- To increase the inflation pres-
sure:Switch on the compressor,
position I. To check the current
inflation pressure setting, briefly
switch off the compressor.
WARNING
Do not let the compressor run for
more than 10 minutes, otherwise
the device will overheat and may be
damaged.
- To reduce the inflation pressure:
Press the button (9) on the com-
pressor.
CAUTION
If the inflation pressure is not main-
tained, drive the vehicle a second
time, refer to "Checking the tire
inflation pressure" on page 7-21.
Then repeat steps 1 to 4.
Use of the TMK may be ineffectual
for tire damage larger than approxi-
mately 4 mm (0.16 in).
Contact a professional workshop if
the tire cannot be made roadworthy
with the Tire Mobility Kit. Kia rec-
ommends to visit an authorized Kia
dealer/service partner.
7 22
If you have a flat tire (with tire mobility kit)
WARNING
The tire inflation pressure must be
at least 200 kPa (29 psi). If it is not,
do not continue driving. Call for road
side service or towing.
Notes on the safe use of the Tire
Mobility Kit
Park your car at the side of the
road so that you can work with
the TMK away from moving traf-
fic. Place your warning triangle in
a prominent place to make pass-
ing vehicles aware of your loca-
tion.
To be sure your vehicle will not
move, even when you're on fairly
level ground, always set your
parking brake.
Only use the TMK for sealing/
inflation passenger car tires. Do
not use on motorcycles, bicycles
or any other type of tires.
Do not remove any foreign
objects such as nails or screws -
that have penetrated the tire.
Before using the TMK, read the
precautionary advice printed on
the sealant bottle!
Provided the car is outdoors,
leave the engine running. Other-
wise operating the compressor
may eventually drain the car bat-
tery.
Never leave the TMK unattended
while it is being used.