Intelligent Speed Limit Warning Activation / Deactivation - Kia XCEED PHEV MY21 Owner's Manual

Driving your vehicle
Do not install any accessories and
stickers. Do not tint the front
windshield, especially near the
rear view mirror.
ISLW detects the traffic signs
through the camera to display the
speed limit information.
Therefore, ISLW may not prop-
erly operate, when it is hard to
detect the traffic signs.
For further details, please refer to
"Driver's attention" on page 6-96.
Pay extreme caution to keep the
camera sensor out of water.
Do not arbitrarily disassemble the
camera assembly, nor apply any
impact on the camera assembly.
Do not locate any reflective
objects (i.e. white paper, mirror)
over the dashboard. Any light
reflection may cause a malfunc-
tion of ISLW.
The system is not available in all
countries.
NOTICE
In the following case, have the sys-
tem checked by a professional
workshop. Kia recommends to visit
an authorized Kia dealer/service
partner:
The windshield glass is replaced.
The the front view camera or
related parts are repaired or
removed.
6 92
Intelligent Speed Limit Warning (ISLW)
Intelligent Speed Limit Warning
activation / deactivation
The driver can activate ISLW by
selecting User Settings → Driver
Assistance → Intelligent Speed
Limit Warning.'
When ISLW is activated, the sym-
bols appear on the instrument
cluster to display the speed limit
information and overtaking
restriction, when your vehicle
passes by the relevant traffic
signs.
When ISLW is activated in the
navigation setting, the above
information and the restriction
are also displayed on the naviga-
tion.
ISLW displays the previous speed
limit information, right after the
ENGINE START/STOP button is
placed to the ON position.
You may find different speed limit
information for the same road.
The information is displayed
depending on the driving situa-
tions. Because, traffic signs with
additional sign(e.g. rainy, arrow,
etc.) are also detected and com-
pared with vehicle internal
data(e.g. wiper operation, turn
signal, etc.)