Shimano FD-RX810 Dealer's Manual page 5

TO ENSURE SAFETY
• Products are not guaranteed against natural wear and deterioration from normal use
and aging.
• For maximum performance we highly recommend SHIMANO lubricants and maintenance
products.
For Installation to the Bicycle, and Maintenance:
• Use an OT-SP sealed cable and cable guide for smooth operation.
• Grease the inner cable and the sliding portions of the outer casing before use to ensure
that they slide properly.
Do not let dust adhere to the inner cable. If the grease on the inner cable is wiped off,
the application of SIS SP41 grease (Y04180000) is recommended.
• If using a full outer model, the end of the
outer casing with the outer cap (resin type)
should be at the derailleur side.
• If using it in a cold region, use a sealed
outer cap (resin type) to prevent freezing.
• If looseness in the links is so great that gear shifting adjustments cannot be made,
replace the derailleur.
The actual product may differ from the figure because this manual is intended
mainly to explain the procedures for using the product.
Derailleur side
Outer cap (resin type)
5
Cap with long tongue