Table of Contents
Advertisement
Appendix 2 Installing the CRPC Frame and CRPC Board
3. Routing Cables
Connect the working and protection power cables of the CRPC frame to the power ports of the frame. Route the
power cables along the cable routing area on the right side of the cabinet to the power cable terminal blocks in the
PDU at the top of the cabinet. Then tighten the screws.
Connect one end of a straight-through network cable to the LAN port of the CRPC board and the other end to the
EXT port of the SCA board. If two CRPC boards are installed, connect the two boards using a hub.
Route the fibers of the CRPC board.
A
SCA
STA
T
ACT
PRO
SR
G
V
SCA
Hub
A
28
28
30
Power
cables
Advertisement
Table of Contents
