Table of Contents
Advertisement
Decommissioning
Disassembly
11.1
34
───
Disassembly may only be carried out by qualified and trained per-
sonnel.
For more information please refer to Chapter: Documentation notes
When disposing of electronic waste, make sure that you dispose of
it in accordance with the regulations applicable in your country.
Read and follow the instructions for proper disposal.
WARNING
Observe the discharge times of the capacitors
Keep to the waiting times after disconnection from the supply net-
work:
• 30 minutes for AX8620 and AX8640
• 30 minutes for AX8108, AX8118 and AX8206
• 30 minutes for AMP8620-2005-0x00
• 30 minutes for AMP8805-1000-0000
• 30 minutes for AX8831
• 30 minutes for AX8832
• 5 minutes for AX5101 to AX5125 and AX5172
• 15 minutes for AX5140, AX5160 and AX5172
• 30 minutes for AX5190 and AX5191
• 45 minutes for AX5192 and AX5193
There is still a life-threatening voltage of > 848 V
tors after disconnection from the supply network. Serious or even
fatal injuries may result if this is ignored.
Do not remove components from the products
Only Beckhoff Automation GmbH & Co. KG is permitted to remove
components.
Contact Beckhoff Service if you have any questions.
Removing the brake resistor from the machine
• Remove cables and electrical connections
• Loosen and remove the brake resistor fixing screws
• Transport the brake resistor to the workplace or put it into stor-
age
AX2090-BW65
on the capaci-
DC
Version: 1.0
Advertisement
Table of Contents
