Table of Contents
Advertisement
Intended use
3.4
Improper use
3.4.1
Version: 1.0
The braking resistors of the AX2090-BW65-xxxx series may only be
operated at the connections provided for them on the AX8000 multi-
axis servo system, the AMP8000 distributed servo drive system or
the AX5000 servo drives.
Together with the Beckhoff products mentioned above, the braking
resistors are to be installed in electrical systems or machines and
are only to be commissioned as integrated components of the sys-
tem or machine.
Read the entire drive system documentation:
• This translation of the original instructions
• Original operating instructions for the AX8000 multi-axis servo
system or
• Original operating instructions for the distributed servo drive
system AMP8000 or
• Original operating instructions for the AX5000 servo drive
• Complete machine documentation provided by the machine
manufacturer
Any use exceeding the permissible values specified in the Technical
data is considered improper and therefore prohibited.
The brake resistors from the AX2090-BW65-xxxx series are not suit-
able for use in the following areas:
• ATEX zones without suitable housing
• Areas with aggressive environments, for example aggressive
gases or chemicals
The relevant standards and directives for EMC interference emis-
sions must be complied with in residential areas. The brake resistors
may only be installed in housings and control cabinets with appropri-
ate shielding attenuation.
AX2090-BW65
Product overview
───
19
Advertisement
Table of Contents
