Table of Contents
Advertisement
Product overview
Product characteristics
3.3
18
───
External brake resistor
An optional external braking resistor can be connected to dissipate
any braking energy that is generated. An external braking resistor is
always required in cases where the braking resistor that is installed
internally is insufficient.
Protection class IP65
The high protection class and corresponding complete contact pro-
tection means that the braking resistors are designed for protection
from dust, dirt and moisture caused by water jets when mounted
outside the control cabinet.
UL and CSA marking
The braking resistors of the AX2090-BW65-xxxx series are labeled
as "UL Recognized Component" in accordance with the applicable
safety requirements of UL and CSA and bear the test number
E-217179. You may therefore use the brake resistors in products,
plants or systems bearing the UL test mark.
Heat conversion
Regenerative energy is converted into heat via the external brake
resistors from the AX2090-BW65 series when braking a servomotor.
AX2090-BW65
Version: 1.0
Advertisement
Table of Contents
