Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Perma child safety 2774
Summary of Contents for Perma child safety 2774
- Page 1 Swing Down Baby Bed INSTALLATION VIDEO Rail Instruction Manual #2774 17.7” (45cm) Tall 35.4” (90cm) Wide IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. This product complies with safety standard ASTM F1004-19.
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY INFORMATION General Maintenance Warnings WHAT’S IN THE BOX Parts INSTALLATION Bar Installation Mesh Installation Positioning the Bed Rail Minimum Distance Warning OPERATION Using the Bed Rail Cleaning Instructions SUPPORT Warranty Certificate Warranty Card After Sales Support... -
Page 3: Safety Information
SAFETY INFORMATION GENERAL Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential. MAINTENANCE Regularly check that the bed rail is functioning correctly, lubricate hinges and moving components with a suitable spray lubricant. Tighten and adjust mounts to ensure secure smooth operation. -
Page 4: Warnings
WARNINGS Adult assembly required. WARNING WARNING Read all the instructions before assembly and use of the product. Dispose of all packaging materials carefully after WARNING assembly. WARNING Not suitable for use of children under the age of 18 months or when the child is over the age of 5 years. - Page 5 WARNINGS Additional and replacement parts shall be WARNING obtained only from the manufacturer. WARNING This bed rail should not be used on a sleeping surface that is more than 23.6” (600mm) from the floor. WARNING To prevent risk of strangulation it is essential to ensure that when the bed guard is fitted into position, there is a gap of at least 9.8”...
-
Page 6: What's In The Box
WHAT’S IN THE BOX PARTS PARTS Bed Rail Mesh Upper Support Bar Under Bar With Strap Bottom Support Bar... -
Page 7: Installation
INSTALLATION STEP 1: BAR INSTALLATION Insert Upper Support Bar into Bottom Support Bar. Make sure the spring pin fits securely into opposing hole so that the two pieces cannot pull apart. Connect the two sides. Make sure the spring pin fits securely into opposing hole so that the bed rail cannot pull apart. -
Page 8: Mesh Installation
INSTALLATION STEP 2: MESH INSTALLATION To install the Mesh on the Bed Rail, slide the Mesh over the Frame until it reaches the other end and zip it shut to complete the installation. - Page 9 Insert the plastic hinge into the assembled panel and press in the metal spring button to fully insert the tube into the hole in the plastic hinge. The spring button should line up with the access hole in the plastic sleeve on the hinge. The spring button will rebound and lock the tube in place.
-
Page 10: Positioning The Bed Rail
INSTALLATION STEP 3: POSITIONING THE BED RAIL Set up the Bed Rail in locked position. Place the Bed Rail on the side of the bed that you would like to have protected, place the fixed plate with strap on the opposite side of the Bed Rail and mount to the outer edge of the box spring. -
Page 11: Minimum Distance Warning
Check to make sure the left and right under bar assemblies are parallel to one another, then place the mattress on the top of the assembly. MINIMUM DISTANCE WARNING To prevent the risk of strangulation, it is essential to ensure that when the Bed Rail is fitted into position, there is a gap of at least 10”... -
Page 12: Operation
OPERATION USING THE BED RAIL Step up Bed Rail: Swing up the panel. Turn the locking tabs and hold them at unlocked position. Continue to swing until the panel touches the side of the mattress. Release the locking tabs and the Bed Rail is locked into use position. LOCKED Fold down Bed Rail: With the locking tabs turned to the unlocked position, hold the upper part of the Bed Rail firmly and swing it... -
Page 13: Cleaning Instructions
CLEANING INSTRUCTIONS Simply use a soft damp cloth to wipe Bed Rail, dry after cleaning. Do not use chemical or abrasive cleaners. -
Page 14: Support
SUPPORT WARRANTY CERTIFICATE Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to expectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: Warranty The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. -
Page 15: Warranty Card
WARRANTY CARD Details: Product Name: Baby Bed Rail Product Number: Grey 2774 Your Name: Address: Phone: Email: Date of Purchase: Location of Purchase: We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference. In the event of a product fault, please contact after sales support. - Page 16 ©2020 Permastik Pty Ltd. All Rights Reserved. Distributed by Perma Products USA® www.permaproducts.com Tel: 239 494 5481 Made in China to Perma quality standards...