Page 1
INSTALLATION VIDEO Ultimate Retractable Gate INSTRUCTION MANUAL #2738 33cm - 1.8m 98.8cm (13” - 71”) (38.9”) FITS OPENINGS TALL IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE. This product complies with safety standard ASTM F1004-21...
TABLE OF CONTENTS SAFETY INFORMATION General Maintenance Warnings 04-05 Mountings / Tools Required 06-07 WHAT’S IN THE BOX Parts 08-09 INSTALLATION Gate Placement With Skirting or Baseboard Inside Opening or Doorway 12-13 Outside Opening or Doorway To Attach / To Remove OPERATION How to Open Cleaning Instructions...
SAFETY INFORMATION GENERAL Read this instruction manual carefully and keep it in a safe place for future reference. The correct use and maintenance of this product is essential. MAINTENANCE Regularly check that the gate is functioning correctly, lubricate hinges and moving components.
WARNING • To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer instructions. • Incorrect installation can be dangerous. • Danger to older children if climbing over the product. • Discontinue the use of the safety barrier if it becomes damaged, broken or disassembled.
Page 5
WARNING • Always check that the safety barrier is correctly closed. • Use only with the locking / latching mechanism securely engaged. • Gate must be installed as close to the ground as possible, as per the installation guides. • Never use with a child able to climb over or dislodge / open the gate or enclosure.
SAFETY INFORMATION MOUNTINGS Gate must be installed in a structurally sound opening. Ensure mounting surface (wall, door, stair posts, etc.) is strong, rigid and has an even surface. Note: If the safety barrier is used at the top of the stairs, it should not be positioned below the top level.
Page 7
SAFETY INFORMATION Select the appropriate fixing method from the list below. HARD WALL MOUNTING BRICK / CONCRETE FOR INSTALLATION Wood Screws Anchor 1. Drill 5mm (3/16”) 2. Clear Hole 3. Insert Anchor & Tap 4. Tighten slowly Pilot Hole WOOD MOUNTING FOR INSTALLATION Wood Screws 2.
WHAT’S IN THE BOX PARTS 1 x Gate Assembly 1 x Gate Mount Installation Guide 1 x Catch Installation Guide...
Page 9
WHAT’S IN THE BOX 1 x Upper Gate Mount 1 x Lower Gate Mount 6 x Wall Spacers 2 x Catch Mounts 4 x 35mm (1 3/8”) 4 x 25mm (1”) 8 x Wall Plugs Upper Mount Screws Mount Screws (use with spacers)
INSTALLATION Skirting or Baseboard To help correct for the offset of the skirting board or baseboard, Spacers will be required. Measure the width of your skirting / baseboard and use the closest number of Spacers to fit this width. Each Spacer is 5mm (3/16”) thick. NOTE: Only use spacers for the Upper Gate Mount and the Upper Catch Mount.
INSTALLATION Step 1. Inside Opening or Doorway Hold guides vertically and completely outstretched against mounting surface with the end marked “FLOOR” even with the floor. Mark screw hole positions. Remove templates. Leave at least 20mm (3/4”) between Guide and the edge of NOTE: the opening to ensure gate won’t overhang edge.
Page 13
INSTALLATION Step 2. Step 3. Align the Upper & Lower Gate Align the Catch Mounts in their Mount on the side you want the correct position on the side you gate to extend from. Tighten want the gate to extend. Screws until each Mount is Tighten Screws until each secure.
INSTALLATION Step 3. Outside Opening or Doorway Follow Steps 1 & 2 from “Installation Inside Doorway or Opening” on pages 12 & 13. Align each Mount in their correct position. Tighten Screws until each Mount is secure. NOTE: These holes must be used to mount outside an opening or doorway.
INSTALLATION To Attach Attach Gate Assembly to the SLIDE Gate Mounts by aligning the gate directly above and sliding straight down over Mounts. The gate will lock in place with a “Click”. Check that the Assembly is flush against the wall and is locked firmly in place.
OPERATION HOW TO OPEN 1. Push To unlock the mechanism simply push down. 2. Twist + Release While still pushing down, turn the button clockwise. Then release. 3. Pull Pull handle in one fluid movement as stopping will engage lock. Hook onto Catch Mounts to secure.
SUPPORT WARRANTY CERTIFICATE Congratulations! You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to excpectations, experience defects due to manufacturing faults, we will provide you with a warranty against defects as follows: WARRANTY The product is guaranteed to be free from from defects in workmanship and parts for a period of 12 months from the date of purchase.
SUPPORT WARRANTY CARD DETAILS: Ultimate Retractable Gate PRODUCT NAME: 2738 PRODUCT NUMBER: YOUR NAME: ADDRESS: PHONE: EMAIL: DATE OF PURCHASE: LOCATION OF PURCHASE: We recommend that you keep a copy of your receipt, showing the date of purchase, with this warranty certificate and keep for your reference.
Page 20
Scan the QR code for Live Chat Support or visit: permachildsafety.com/contact-us Perma Child Safety @permachildsafety...