Okay FGS 80-1 LI Operating Instructions Manual page 34

- Hold the power tool properly, e.g. with
both hands on the handles, if two han-
dles are present. Losing control of the
device can result in injuries.
• This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge.
• This machine may cause serious injuries.
Please read the instruction manual care-
fully as to the correct handling, the prepa-
rations, the maintenance and the proper
use of the cutting tool. Familiarize yourself
with the machine before the first use and
also have yourself introduced to practical
use of the machine.
• The cutting tool continues to run after the
device is switched off.
• Turn off power before cleaning.
• Beware! Keep your fingers away from the
cutting area!
• Only switch on the device if your hands
and feet are away from the cutting tools.
• Remove all debris from the working area
before use and pay attention to such de-
bris while working!
• Turn the machine off before transporting
and wait until the blade stops moving. Main-
tenance and cleaning should be performed
only when the machine is turned off.
• Children and teenagers under 16 years of
age must never use this device!
• Never permit children or persons who are
not familiar with the operating instructions
to use this device.
• Statutory regulations can restrict the age
of the operator.
• Be aware of third persons in the work area.
• Use of the machine must be prevented is
people, especially children and house pets
are present.
• Only use the shear in daylight or suffi-
ciently bright artificial illumination.
• The clippers must be subjected to regular
maintenance and checks. Damaged blades
must be replaced as a pair. Professional
repair is required if damage occurs due
to impact.
GB | Operating Instruction
• The machine should be inspected and
• Wear suitable working clothes, i.e. protec-
• After you finish using the clippers and
• Check the cutting unit regularly for damage
• Never hold the clippers by the blades, you
• Never touch moving blades in an attempt
• Keep the machine away from children and
• When working with the shears, always take
• Do not use shears with a damaged or ex-
• Ensure that all protective devices and han-
• Always use the protective part designed
• Before starting the work, make yourself fa-
• Only use the spare sparts and accessories
• Note that the user shall be responsible
• Prior to using the machine, inspect it visu-
• Never use the machine with damaged cov-
32
maintained regularly by a responsible re-
pair service only.
tive glasses, protective means for ears,
non-slippery shoes and working gloves.
Do not wear broad clothes which could be
caught by the moving parts.
before cleaning them, it is necessary to
ensure that the machine cannot be acci-
dentally turned on, such as by unlocking
the switch.
may run the risk of injury even when the
clippers are not moving!
to remove debris or if the blades are
blocked. Always switch off the device.
store it in a safe place.
a stabile standing position, particularly
when you are using steps or a ladder.
cessively worn-out cutting part
dles are installed on the machine. Never try
to put an incomplete machine in operation.
for the blade when transporting and stor-
ing the shears.
miliar with the surroundings and possible
dangers which you may not hear because
of the noise.
recommended by the manufacturer.
himself for accidents and hazards that re-
sult to other people or their property.
ally for damaged, missing, or incorrectly
attached protective devices or coverings.
erings or protective devices or without the
covering or protective devices.