Table of Contents
Advertisement
PARAMETER 2
1 character
PARAMETER 3
8 characters
PARAMETER 4
2 characters
3.5.11 RQ – request
The RQ command answers with the ATQA answer of the transponder.
Input format:
Output (example):
Parameters:
PARAMETER
0
1
3.5.12 SE – select
The command SE selects that transponder that answered at the anticollision. For ultralight and DESFire
transponders it is select level 1 command. The answer is the SAK of the transponder.
Input format:
Output (example):
3.5.13 SE2 – select level 2
The command SE2 selects that transponder that answered at the anticollision level 2. For ultralight and
DESFire transponders it is select level 2 command.
Input format:
--------------------------------------------------------------------------------32/45--------------------------------------------------------------------------------
FUNCTION
block
FUNCTION
value
FUNCTION
optional address
RQ <SP> parameter <CR>
4400 <CR>
FUNCTION
non halt transponders
all transponders
SE <CR>
18 <CR>
SE2 <CR>
Advertisement
Table of Contents
