New Holland 200 Series Service Manual page 35

(16) ENGINE COOLANT TEMPERATURE BAR
GRAPH:
This bar graph indicates the relative
temperature of the engine coolant from
0 - 110 °C (32 - 230 °F). If the coolant
temperature goes above 110 °C (230 °F), all
8 bars will display, the backlighting will flash,
and the audible alarm will sound.
(17) HYDRAULIC FLUID TEMPERATURE BAR
GRAPH:
This Hydraulic Oil Temperature Bar Graph
indicates the relative temperature of the
hydraulic oil from 0 - 110 °C (32 - 230 °F). If
the temperature exceeds 110 °C (230 °F), all
8 graph segments will display, backlighting
will flash, and the audible alarm will sound.
(18) TEXT DISPLAY:
This display will show the following during
normal operation, as selected by the
operator.
• Engine Hours: Engine hours will always
be displayed momentarily when the oper-
ator initially sits in the seat. The operator
may choose to leave engine hours on dis-
play continuously or select one of the fol-
lowing.
• Engine RPM
• Engine Coolant Temperature (degrees F
or C)
• Hydraulic Oil Temperature (degrees F or
C)
• Cycle: If this display option is chosen, the
display will continuously cycle through all
four of the above items
The text display will also help the operator
or technician with information as the SETUP
menu is utilized.
NOTE: To change display mode "on the go"
hold the AUX OVERRIDE button (3) until
the current option name is displayed, push
the AUX OVERRIDE button repeatedly
until desired option name is displayed.
This display mode value will continue to be
shown until another selection is made.
INTRODUCTION
47712044 29/04/2014
29
4
93109330