New Holland 200 Series Service Manual page 27

(1) KEY SWITCH
This four position key switch has AUX, OFF,
RUN and START operations.
(2) STOP
Severe warning requiring immediate shut
down, RED lamp will flash and audible alarm
will sound.
(3) ENGINE MALFUNCTION
Yellow lamp will flash when an engine fault is
detected. Use the fault code that appeared
in text display and reference it in the trouble
shooting section of this manual.
(4) HYDRAULIC SYSTEM MALFUNCTION
Yellow Lamp will flash when a hydraulic
fault is detected. Use the fault code that
appeared in text display and reference it in
the trouble shooting section of this manual.
(5) ELECTRONIC SYSTEM MALFUNCTION
This yellow lamp will flash and the alarm will
sound. Use the fault code that appeared
in text display and reference it in the
troubleshooting section of this manual.
(6) SEAT BELT
RED lamp will illuminate when the restraint
bar is raised. RED lamp will also illuminate
when the operator lifts his body off of the
operator's seat.
INTRODUCTION
47712044 29/04/2014
21
1
93109329A