New Holland 200 Series Service Manual page 34

(10) OPERATE
This button activates and deactivates the
hydraulic system when engine is running.
N : This button is used for user code lock
OTE
and unlock.
(11) AUXILIARY HYDRAULIC INTERLOCK
OVERRIDE:
When an operator leaves the seat, oil flow
to an attachment will normally be halted via
direct hydraulic flow cutoff. Depress this
button and leave the seat within 30 seconds
to defeat this interlock. Small red indicator
lamp below the switch illuminates when the
interlock is defeated.
N : This button is used for user code lock
OTE
and unlock.
(12) H / ISO Control Pattern Selector, if equipped
This selects the drive pattern type of hand
control operation. Read the proper steps
listed in this chapter to activate.
(13) PARK BRAKE SWITCH
Press the PARK BRAKE switch to activate
or deactivate the parking brake. The
park symbol on the instrument panel will
illuminate red when the parking brake is on.
The other hydraulic functions remain active
when the parking brake is on.
(14) WORK LIGHTS
This knob controls the external working
lights and road lights.
(15) FUEL GAUGE:
The fuel gauge consists of a series of bars
that indicate the level of fuel in the fuel
tank. When all 8 bars are visible the fuel
tank is full. Bottom bar flashing indicates
approximately 1 gal of fuel remaining.
INTRODUCTION
47712044 29/04/2014
28
3
93109330