Table of Contents
Advertisement
When blending large quantities to max level, it is advised to place
one hand on top of the lid this will prevent the lid from popping
out due to excessive pressure.
•
To prepare for blending, cut the food into chunks
approximately 15mm square and place them into the Jug (3),
add the required amount of liquid using the measuring gauge
on the jug. Place the Lid (2) onto the Jug (3).
•
Make sure the speed dial is in the '0' position and insert the
mains plug into the socket.
P
•
To start blending, turn the speed dial to the desired setting
between 1 and 4. The speed can be changed at any time
during blending. If you wish to add more ingredients, switch
the dial to '0' and turn the measuring cup (1) anti-clockwise
and remove it. Add the ingredients through the hole in the lid
and replace the measuring cup (1) Do not operate for more
than 30 seconds and allow the blender to rest for 1 minute
between cycles. Repeat until the desired results are reached,
to finish blending turn the dial to '0'.
•
Once the ingredients are blended, return the speed dial to '0'
and remove the mains plug. Hold the motor housing, grasp
the jug handle, turn anticlockwise and lift upwards off the
base, remove the lid and pour out the contents.
•
Using the Pulse: For quick sharp bursts of power, turn the
speed anti-clockwise to the 'P'.
0
1
2
3
4
0
1
P
2
3
4
Advertisement
Table of Contents
