Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Daewoo SDA1088
Summary of Contents for Daewoo SDA1088
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference: • Read and familiarise yourself with all operating instructions before using this Jug Blender. • Before plugging your unit into the mains, visually check that the unit is intact and has not suffered any transit damage. - Page 3 manufacturer or a suitable qualified after-sales-service in order to avoid a hazard. • Do not allow the mains cable to hang over sharp edges or come in contact with hot surfaces. • Do not run the mains cable under carpets, rugs, etc. •...
- Page 4 Before the first time you use your Jug Blender Please read these operating instructions thoroughly and keep them in a safe place for future reference. Remove all packing and dispose of responsibly. It is recommended to rinse out the Jug before first use. Instructions for use •...
- Page 5 Using your Blender • Ensure the Speed Control (5) is in the ‘0’ position and insert the mains plug into the socket (ensuring hands are dry): ▲ • Turn the Speed Control (5) to pulse ‘P’ several times for pre-blending. •...
- Page 6 500 W Capacity 1.5L Model SDA1088 Fitting a new plug If for any reason you need to fit a new plug, the flexible mains lead must be connected as shown below. The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:...
- Page 7 The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red. The wire which is coloured Green and Yellow must be connected to the terminal which is marked with the letter E or coloured Green.
Need help?
Do you have a question about the SDA1088 and is the answer not in the manual?
Questions and answers