Assembling The Blender; Using The Blender - Daewoo CALLISTO SDA1993 Manual

Before using the blender for the first time
Please read these operating instructions thoroughly and keep
them in a safe place for future reference.
Remove all packing and dispose of responsibly.
It is recommended to wash all parts except the motor housing in
warm soapy water, rinse and dry thoroughly.
Never immerse the motor in water or other liquids.
CAUTION: the blades inside the jug are NOT removable
and are very sharp; extreme caution should be taken whilst
cleaning the inside of the jug.

Assembling the blender

•
CAUTION: Always assemble the blender before connecting
to the mains supply. Do not operate the blender until it is
fully assembled.
1. Turn the glass jug (3) upside down onto a soft cloth.
2. Place the waterproof seal (4) onto the neck of the glass jug.
3. Place the blade assembly (5) into the neck of the glass jug.
4. Place the blade base (6) onto the neck of the glass jug and
turn clockwise until it is tight.
5. Place the motor housing (7) onto a flat stable surface.
6. Place the jug (3) onto the motor housing (7).
7. Place the measuring cup (1) into the jug lid (2) and turn
clockwise to lock into place.
8. Place the lid (2) with the measuring cup (1) onto the glass jug
(3).

Using the blender

Note: Always remove the jug when adding liquid to prevent
spillages onto the base unit. It is recommended to fill the jug
(food and liquid) to no more than 1/3(500ml) - 2/3 (1000ml)of
the amount of the jug's capacity. Do not exceed the maximum
capacity of the jug (1000ml) on the jug as some foods expand
during blending.