Table of Contents
Advertisement
Electrical Connections
This appliance is fitted with a fused three-pin plug to BS 1363.
If the plug has to be removed, it should be cut off and carefully
disposed of immediately. To avoid a possible shock hazard, do
not insert the discarded plug into a mains socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains
lead must be connected as shown below. The wires in the mains
lead fitted to this appliance are coloured in accordance with the
following code:
Connect Blue
to Neutral (N)
If colours of the wires in the mains lead of this appliance do not
correspond with the coloured marking identifying the terminals in
your plug, proceed as follows:
The wire which is coloured Blue must be connected to the
terminal which is marked with the letter N or coloured Black. The
wire which is coloured Brown must be connected to the terminal
which is marked with the letter L or coloured Red. Before refitting
the plug cover check that there are no cut or stray strands of wire
inside the plug. Use a 5 Amp BS 1362 fuse, only BSI or ASTA
approved fuses should be used. If you are in any way unsure
which plug or fuse to use, always refer to a qualified electrician.
Brown wire = Live (L)
Blue wire = Neutral (N)
Connect Brown
to Live (L)
Ensure the outer sheath
is securely held by the
cord clamp
Advertisement
Table of Contents
